Mazda3Club.com : The Original Mazda3 Forum

Mazda3Club.com : The Original Mazda3 Forum (https://www.mazda3club.com/)
-   Exterior/Interior/Audio (https://www.mazda3club.com/exterior-interior-audio-4/)
-   -   Whats the best material to wash your car with? (https://www.mazda3club.com/exterior-interior-audio-4/whats-best-material-wash-your-car-18133/)

2003ProtegeES December-29th-2002 05:13 PM

Whats the best material to wash your car with?
 
So it doesnt develop swirllys?

Sir Nuke December-29th-2002 06:05 PM

Re: Whats the best material to wash your car with?
 

Originally posted by 2003ProtegeES
So it doesnt develop swirllys?
the best preventitive.....get your car as clean as possible BEFORE you ever start to lather her up.....spray as much of the dirt off as absolutely possible....

then most people will agree....the best thing to use on your car is a REAL washing mit....made from sheepskin.....wool and all....looks like a big fuzzy mitten.....one of the WORST things you can use is a sponge and or a brush, that is unless you are just using them on your wheels/tires.

Bill December-29th-2002 06:15 PM

And Do NOT dip the wash mitt back in the soapy water before you rinse it out.

2003ProtegeES December-29th-2002 06:25 PM

Thx guys!!

beachnut December-29th-2002 08:14 PM

REAL cotton chenille mitts are great too (if you can find them). Most mitts at places like Walmart and the auto parts stores are synthetic cotton blends. Here's where I get mine:

http://www.properautocare.com/chenwasmit.html

Like Bill said, use two buckets - one for wash solution and one for clean rinse water. Rinse your mitts often. Also, try to use a high quality wash shampoo, not dishwashing liquid. I use Meguiar's Gold Class wash, you can find it reasonably priced at Target or Autozone.

What you dry your car with is important too. I use only microfiber towels, which you can get at places like Pep Boys. Turtle Wax has a nice 2-towel set, but I usually order larger ones from CMA (the link above), or here:

http://www.microfibertech.com/

HIH

Geezer Bob December-30th-2002 07:27 AM

I am very happy with entire Zymol product line for washing and waxing. Their stuff is pricey, but I love how clean my car looks. It seems to really get the dirt off without swirls or hard rubbing. Just my .02

BL_Protege December-30th-2002 07:49 PM

so sponges are THAT bad? :confused: b/c now i feel like i've been doing a LOT more damage to the car lol

leungwingkei December-31st-2002 04:17 PM

This is what I do in order to get swirls out. First I use Mother's carnuba cleaner wax. The paste is very thick so it works very well in covering scratches and protecting the paint. After I let the wax sit in for a while, I then proceed to apply Zymol liquid cleaner wax and buff to a lustrous shine. The liquid is not as thick, and doesn't offer much protection but it makes water bead well, and the shine....just amazing.

heylee January-28th-2003 08:18 AM

I use a big sponge, it doesn't mess up the car. I also use Maguires car wash and quick wax. The reason I don't get swirlies though when it dries is the fact that I use one of those spongy cloths to dry the car with. The kind you wring out. It gets the car streak free and you can find them at wal-mart for under $10. ;)

JAC January-28th-2003 12:07 PM

How do you guys clean your lamb wool washing mits after you're done washing you car?

sileighty21 January-28th-2003 09:43 PM

by far the best product to dry your car is the california water blade. i work at a nissan dealership as a detailer and we use those. i recommend them to anyone. just make sure the blade is clean everytime you use it though, otherwise it might scratch if you're not careful.

ProjectZero February-25th-2003 06:35 PM


Originally posted by JAC
How do you guys clean your lamb wool washing mits after you're done washing you car?
Me, two ways, depending on how dirty the mitt got.

Normally, I just empty, rinse and fill up the bucket with some new water and car wash suds, hand agitate the mitt (with wring), rinse in another bucket (so that I can see the icky stuff float away) and air dry.

If that doesn't do the trick, I throw it and old t-shirts and towels into the washer, pour in very little liquid detergent and let 'er rip. The old shirts 'n towels don't do anything else around the house (i.e. they're not used as shop towels) except to mop up liquid spills in the kitchen. No dusting, no drying (I have other stuff to do that). The shirts and towels provides balance in the washer and helps with the agitation during the wash (stuff rubbing against each other).

After the industrial strength wash, the mitt is air dried.

The mitt is replaced about every other year...

shackmgr6073 February-25th-2003 08:11 PM

rocks, wash your car with rocks. And if you beleive that I got a 12 inch C@CK

eggynatey February-25th-2003 09:51 PM

My two cents(as a pro detailer):
Just throw your mitt in the washer. It'll clean right up. Also, there's an artificial chamois called a "Water Sprite" that I swear by. The things last YEARS and are much more gentle on the paint than a chamois.
I agree w/ beachnut in that the chenille wash-mits are the way to go, but a wool one will also work fine.
As far as off-the-shelf at pep-boys, I'll trust stuff that is made by Maguiers, Blue Magic or Mother's, but Turtle-Wax is the Penzoil of waxes ;)

The best advice is to just take your time, use lots of clean towels for buffing, and be super gentle. Another pointer is to work from the roof down, as most dirt and road-grime is down low. You wouldn't want to get grease on your mit and smear it all over. :)


All times are GMT -5. The time now is 10:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands