Mysterious Valve Cover
January-18th-2003, 04:27 AM
#1
Protege Enthusiast
Thread Starter
Join Date: Sep 2002
Location: NoLa
Posts: 124
Mysterious Valve Cover
Witch Protege Uses this valve cover???? or better yet witch motor uses this valve cover???
Its not for the Protege 5.........
If you know please post or send me an e mail at acoupdetat@***.net
Its not for the Protege 5.........
If you know please post or send me an e mail at acoupdetat@***.net
January-18th-2003, 01:48 PM
#4
Rotor Head
Join Date: Dec 2001
Location: Indiana
Posts: 264
That's a 626 valve cover guys. 
I just painted my brother in-law's the other day for him, and that's exactly what it looks like. I think he has a 94 626 LX. I'm pretty sure that's the only car that has the valve cover. I think it's a 16 valve 2.0L. You gonna try and use one for somethign????
I just painted my brother in-law's the other day for him, and that's exactly what it looks like. I think he has a 94 626 LX. I'm pretty sure that's the only car that has the valve cover. I think it's a 16 valve 2.0L. You gonna try and use one for somethign????
January-18th-2003, 05:42 PM
#7
Salt addict
Join Date: Aug 2002
Location: Niagara Falls Ont.
Posts: 1,201
Originally posted by Glazedham42
That's a 626 valve cover guys. I just painted my brother in-law's the other day for him, and that's exactly what it looks like. I think he has a 94 626 LX. I'm pretty sure that's the only car that has the valve cover. I think it's a 16 valve 2.0L. You gonna try and use one for somethign????
That's a 626 valve cover guys.
I just painted my brother in-law's the other day for him, and that's exactly what it looks like. I think he has a 94 626 LX. I'm pretty sure that's the only car that has the valve cover. I think it's a 16 valve 2.0L. You gonna try and use one for somethign????
January-20th-2003, 01:16 PM
#9
Protege Anarchist
Join Date: Sep 2001
Location: Dallas, TX
Posts: 708
There's 7 different versions of the FS/FP valve cover AFAIK:
early FS/FP valve cover-- Mazda version.... letters casted on them "16 VALVE DOHC FUEL INJECTION.... MAZDA".... hose/harness supports at the side of the cover
early FS/FP valve cover... Ford version... letters casted on them "16 VALVE DOHC FUEL INJECTION.... FORD" it is the oval logo.... hose/harness supports at the side of the cover
revised FP valve cover.... Mazda version... letters casted on them "16 VALVE DOHC.... MAZDA".... square casting line/marks around the spark plug holes
revised FP valve cover.... Ford version.... letters casted on them "16 VALVE DOHC.... FORD".... it is the oval logo.... square casting line/marks around the spark plug holes
revised FS valve cover.... Mazda version... letters casted on them "16 VALVE DOHC.... MAZDA".... square casting line/marks around the spark plug holes, pair of bolt holes next to the #2 and #4 spark plug holes.... part of the hump on the main part of valve cover are lower to give clearance to spark plug coil pack.... FP2 casted on the back of valve cover
revised FS valve cover..... Ford version... letters casted on them "16 VALVE DOHC.... FORD".... it is the oval logo.... square casting line/marks around the spark plug holes, pair of bolt holes next to the #2 and #4 spark plug holes.... part of the hump on the main part of valve cover are lower to give clearance to spark plug coil pack... additional bolt hole located next to the raised oil filler neck to allow #1 spark plug wire retainer clip to be installed
FS-ZE valve cover.... no letters casted on it.... has 4 studs at the side of valve cover to hold plastic cover... square casting line/marks around the spark plug holes, pair of bolt holes next to the #2 and #4 spark plug holes.... part of the hump on the main part of valve cover are lower to give clearance to spark plug coil pack.... additional bolt hole located next to the raised oil filler neck to allow #1 spark plug wire retainer clip to be installed... raised oil filler neck to allow it to accessable with plastic engine cover installed
early FS/FP valve cover-- Mazda version.... letters casted on them "16 VALVE DOHC FUEL INJECTION.... MAZDA".... hose/harness supports at the side of the cover
early FS/FP valve cover... Ford version... letters casted on them "16 VALVE DOHC FUEL INJECTION.... FORD" it is the oval logo.... hose/harness supports at the side of the cover
revised FP valve cover.... Mazda version... letters casted on them "16 VALVE DOHC.... MAZDA".... square casting line/marks around the spark plug holes
revised FP valve cover.... Ford version.... letters casted on them "16 VALVE DOHC.... FORD".... it is the oval logo.... square casting line/marks around the spark plug holes
revised FS valve cover.... Mazda version... letters casted on them "16 VALVE DOHC.... MAZDA".... square casting line/marks around the spark plug holes, pair of bolt holes next to the #2 and #4 spark plug holes.... part of the hump on the main part of valve cover are lower to give clearance to spark plug coil pack.... FP2 casted on the back of valve cover
revised FS valve cover..... Ford version... letters casted on them "16 VALVE DOHC.... FORD".... it is the oval logo.... square casting line/marks around the spark plug holes, pair of bolt holes next to the #2 and #4 spark plug holes.... part of the hump on the main part of valve cover are lower to give clearance to spark plug coil pack... additional bolt hole located next to the raised oil filler neck to allow #1 spark plug wire retainer clip to be installed
FS-ZE valve cover.... no letters casted on it.... has 4 studs at the side of valve cover to hold plastic cover... square casting line/marks around the spark plug holes, pair of bolt holes next to the #2 and #4 spark plug holes.... part of the hump on the main part of valve cover are lower to give clearance to spark plug coil pack.... additional bolt hole located next to the raised oil filler neck to allow #1 spark plug wire retainer clip to be installed... raised oil filler neck to allow it to accessable with plastic engine cover installed
January-21st-2003, 12:42 PM
#10
Protege Enthusiast
Join Date: Sep 2001
Location: Heavens Waiting Room
Posts: 188
Originally posted by PseudoRealityX
staples, elmer's, JB weld, paper clips, zip ties, nails, spit.....
Any of these can hold on some flimsy little coil packs.. pfft!
staples, elmer's, JB weld, paper clips, zip ties, nails, spit.....
Any of these can hold on some flimsy little coil packs.. pfft!
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)