Mazda3/Mazdaspeed3 General/Maintenance Discussion of the Mazda3 and MazdaSpeed3

Mazda 3 beeping noise

Thread Tools
 
Search this Thread
 
Old July-18th-2009, 09:55 AM
  #1  
Registered User
Thread Starter
 
Zoberman's Avatar
 
Join Date: Jul 2009
Posts: 3
Zoberman is an unknown quantity at this point
Mazda 3 beeping noise

Hi all,

I have a Mazda 3, 1600 automatic, 2003.

Yesterday I was parking my car, switched off the ignition and noticed that the dashboard started blinking. I removed the key from the ignition but the blinking kept on going. When I opened the door, a rapid beeping sound occurred which was in sync with the blinking lights on the dashboard.

I started taking the car apart to see if some connector was loose or badly connected, but I have found no indication of such.

Today I opened the car and the beeping sound started immediately when the door was opened. closing the door makes the beeping sound go away, however the dashboard does not seem to flicker as it did yesterday, the km meter is just turned on. So the dashboard does not seem to be switched off when I turn the ignition to off and remove the key.

I also tried the advice given on this forum, regarding the key reminder alarm, I removed the red wire with black trace, but that did not stop the beeping sound.

When I turn the parking lights or headlights on, the beep becomes constant..

Has anyone had a problem similar to this one or have any idea on what might be the problem?

Last edited by Zoberman; July-18th-2009 at 11:56 AM.
Zoberman is offline  
Old July-19th-2009, 07:36 AM
  #2  
Registered User
 
icspots's Avatar
 
Join Date: Apr 2006
Location: Winston-Salem, NC
Posts: 504
icspots is on a distinguished road
There are pretty much two chiming noises the 3 makes when a door is open... the "key in" reminder, and the headlight on reminder.

The key in chime is activated by a mechanical piece inside the ignition. If it becomes broken it always thinks there's a key in the ignition and will always chime. An easy way to check this is with whether or not your keyless entry works. The way the 3 is set up if the key's in the ignition then the remote entry doesn't work. So does your remote work?
icspots is offline  
Old July-19th-2009, 07:47 AM
  #3  
Registered User
Thread Starter
 
Zoberman's Avatar
 
Join Date: Jul 2009
Posts: 3
Zoberman is an unknown quantity at this point
Originally Posted by icspots
There are pretty much two chiming noises the 3 makes when a door is open... the "key in" reminder, and the headlight on reminder.

The key in chime is activated by a mechanical piece inside the ignition. If it becomes broken it always thinks there's a key in the ignition and will always chime. An easy way to check this is with whether or not your keyless entry works. The way the 3 is set up if the key's in the ignition then the remote entry doesn't work. So does your remote work?
Yes my remote works, I was looking at this problem better yesterday and I think you´re right this has something to do with the headlights on reminder.

Looking at the car from the outside, the headlights are definately off, and they don´t seem to flicker like my dashboard. It surely looks like a bad ground connection somewhere but the problem is that I have not been able to find an electrical drawing of the headlight on reminder system anywhere.

Last edited by Zoberman; July-19th-2009 at 07:54 AM.
Zoberman is offline  
Old July-19th-2009, 09:05 AM
  #4  
Registered User
Thread Starter
 
Zoberman's Avatar
 
Join Date: Jul 2009
Posts: 3
Zoberman is an unknown quantity at this point
Fog lights?

I started removing the relays for the lights from the car, one by one, and when I removed the front fog light relay, the beeping sound stopped and the light flicker also stopped. The fog light indication light was however never turned on in the dashboard and the car doesn´t even have front foglights. The relay measures ok but seems to be getting a signal from somewhere. The rear fog lights are not turned on when the relay is in its place, and I have not measured if there is any voltage to the plugs to the front fog lights ( I would assume so though) but the plugs look fine.

Also I´m wondering, shouldn´t the dashboard turn completely off when I switch the car off? the image below shows the dashboard with the car turned off, and the key removed from the ignition. Should I be able to read the km status?


Last edited by Zoberman; July-19th-2009 at 05:39 PM.
Zoberman is offline  
Old July-21st-2009, 06:48 PM
  #5  
Registered User
 
icspots's Avatar
 
Join Date: Apr 2006
Location: Winston-Salem, NC
Posts: 504
icspots is on a distinguished road
Yeah you definitely have something screwy there.

As to the LCD being lit up....... it's actually always displaying things, though when you turn off the backlight turns off so unless you shine a light on the face of it you can't read it. Unless you're in the mood for tracing back a weird electrical short you might want to take it to the dealer (assuming you're under warranty still).
icspots is offline  
Old October-26th-2009, 04:52 PM
  #6  
Registered User
 
annie's Avatar
 
Join Date: Oct 2009
Posts: 2
annie is an unknown quantity at this point
Unhappy Did you find the solution!!!? I just had the same problem today!

After a very long drive I just had the same problem with my mazda3 04 manual. Now the dashboard stays lit up when key is out of ignition and when I open the door the same alarm comes on as when your are not wearing your seatbelt, that or the alarm that comes on when you've left your headlights on.
Had someone check the engine and he couldn't find anything wrong, headlights are also fine.
Did you find out what the problem was and is it expensive to fix?
annie is offline  
Old October-27th-2009, 11:24 AM
  #7  
Registered User
 
djs2571's Avatar
 
Join Date: Mar 2007
Location: Newark,ny
Posts: 913
djs2571 is on a distinguished road
jiggle the ign switch, seems like it is sticking on when you remove the key.
djs2571 is offline  
Old October-27th-2009, 12:17 PM
  #8  
Registered User
 
annie's Avatar
 
Join Date: Oct 2009
Posts: 2
annie is an unknown quantity at this point
Thumbs up Glove box light!!

Thanks to this forum and the dealer I rang today, I now know all this is because of the bulb in the glove box. Imagine all that just to tell you your glove box bulb is out!!! Seems excessive huh!!

I wouldn't mind but I first rang a dealer in my own county and she wouldn't tell me anything, said I needed to bring it in and pay €90 just for them to plug it into their computer! Then I rang the dealer where the car was originally bought and they were great! Really helpful!! I know where I'd buy my next car!!!
annie is offline  
Old November-3rd-2009, 08:59 PM
  #9  
Registered User
 
bjong's Avatar
 
Join Date: Nov 2009
Posts: 1
bjong is an unknown quantity at this point
Originally Posted by icspots
There are pretty much two chiming noises the 3 makes when a door is open... the "key in" reminder, and the headlight on reminder.

The key in chime is activated by a mechanical piece inside the ignition. If it becomes broken it always thinks there's a key in the ignition and will always chime. An easy way to check this is with whether or not your keyless entry works. The way the 3 is set up if the key's in the ignition then the remote entry doesn't work. So does your remote work?
this sounds like a problem i might have, what's the best option to fix this? i'm still under warranty
bjong is offline  
Old February-15th-2010, 11:48 AM
  #10  
Registered User
 
Gray~M3's Avatar
 
Join Date: Feb 2010
Posts: 1
Gray~M3 is an unknown quantity at this point
Originally Posted by icspots
There are pretty much two chiming noises the 3 makes when a door is open... the "key in" reminder, and the headlight on reminder.

The key in chime is activated by a mechanical piece inside the ignition. If it becomes broken it always thinks there's a key in the ignition and will always chime. An easy way to check this is with whether or not your keyless entry works. The way the 3 is set up if the key's in the ignition then the remote entry doesn't work. So does your remote work?
I have a 05 M3 with 88K and the problem I have is the key in ignition reminder is always on and the key fob does not work. I understand from talking to the dealer's parts department that there are three parts to this ignition switch. Can I replace this mechanical part inside the switch my self or do I need to take it to a dealer? Do you know what part it is and do you have any instruction on how to do it?
Thanks in advance for any assistance on this!
Gray~M3 is offline  
Old April-27th-2010, 04:36 PM
  #11  
Registered User
 
tom.vieja's Avatar
 
Join Date: Apr 2010
Posts: 2
tom.vieja is an unknown quantity at this point
Originally Posted by Zoberman
Hi all,

I have a Mazda 3, 1600 automatic, 2003.

Yesterday I was parking my car, switched off the ignition and noticed that the dashboard started blinking. I removed the key from the ignition but the blinking kept on going. When I opened the door, a rapid beeping sound occurred which was in sync with the blinking lights on the dashboard.

I started taking the car apart to see if some connector was loose or badly connected, but I have found no indication of such.

Today I opened the car and the beeping sound started immediately when the door was opened. closing the door makes the beeping sound go away, however the dashboard does not seem to flicker as it did yesterday, the km meter is just turned on. So the dashboard does not seem to be switched off when I turn the ignition to off and remove the key.

I also tried the advice given on this forum, regarding the key reminder alarm, I removed the red wire with black trace, but that did not stop the beeping sound.

When I turn the parking lights or headlights on, the beep becomes constant..

Has anyone had a problem similar to this one or have any idea on what might be the problem?
Hi man.How did you fix taht problem with beeping sound and blinking dashboard in mazda 3? i have the same problem?
tom.vieja is offline  
Old April-27th-2010, 04:38 PM
  #12  
Registered User
 
tom.vieja's Avatar
 
Join Date: Apr 2010
Posts: 2
tom.vieja is an unknown quantity at this point
Originally Posted by annie
Thanks to this forum and the dealer I rang today, I now know all this is because of the bulb in the glove box. Imagine all that just to tell you your glove box bulb is out!!! Seems excessive huh!!

I wouldn't mind but I first rang a dealer in my own county and she wouldn't tell me anything, said I needed to bring it in and pay €90 just for them to plug it into their computer! Then I rang the dealer where the car was originally bought and they were great! Really helpful!! I know where I'd buy my next car!!!
Hi Annie.
I have the same problem with my mazda 3. The beeping sound and blinking dashboard.
How did you fix it ?
Tom
tom.vieja is offline  
Old July-30th-2010, 09:54 AM
  #13  
LIM
Registered User
 
LIM's Avatar
 
Join Date: Jul 2010
Posts: 2
LIM is an unknown quantity at this point
Ignition Switch Problem

I have a new 2010 Mazda 3 purchased in March. In June the keyless entry occasionally would not work, and when the key was removed from the ignition there was chiming until the door closed. Open the door and it chimed.
It started intermittently but after a while the keyless entry did not work at all and the chiming happened every time I exited.
Then, the car battery was dead one morning. The local dealer replaced the ignition switch and all was well... for three weeks!
Last night it happened again, but this morning all was well when I drove it to the dealer, who cannot fix what they cannot detect as wrong.

Anybody have any answers to this one?
LIM is offline  
Old August-13th-2010, 05:43 AM
  #14  
Registered User
 
siki12's Avatar
 
Join Date: Aug 2010
Posts: 1
siki12 is an unknown quantity at this point
Mazda 3 beeping noise

Hi,

There are two possibilities for this beeping problem:
- the light in the drawer at the co-drivers side is dead or
- the ignition switch insert is broken.

Hope this helps.
siki12 is offline  
Old August-13th-2010, 09:14 AM
  #15  
LIM
Registered User
 
LIM's Avatar
 
Join Date: Jul 2010
Posts: 2
LIM is an unknown quantity at this point
Just dropped the car off at the dealer since it beeps every time the key is removed now.
They are going to replace the ignition switch and a sensor. I hope they get it right this time!
LIM is offline  


Quick Reply: Mazda 3 beeping noise



All times are GMT -5. The time now is 11:28 PM.